Prestige Series Vintage Vertical Mount Open Bronze Gear Tuning Machines These tuning machines are created especially for drop in replacement of old Kluson® tuning machines from the 30's and 40's with a 1/4 in. string post diameter. While they look the same, they feature a diecast base, bronze ring gear, stainless worm gear with close tolerance bushings, and 18:1 gear ratio. For solid headstocks with vertical mount. [SKU:KP24-3V] Specifications Base Plate material= Zinc Diecast Worm Gear material= Stainless Steel Ring Gear material= Bronze Gear ratio= 18:1 String Post Orientation= Vertical for drilled Pegheads String Post Overall length= 1 1/16 in. (27mm w/ domed top) String Post Diameter= 1/4 in. (6.35mm) String thru hole location= 13/16 in from baseplate Mounting hole spacing= 24mm (Vintage Kluson) Configuration= 3 + 3 Mounting hardware included= screws and bushings Bushing Dimensions= 6.5mm I.D. / 8.75mm O.D. Bushing Type= Hex head push-in

Prestige Series Horizontal Mount Open Bronze Gear Tuning Machines Classic pre-war elegance coupled with state of the art manufacturing and construction to create an exceptional tuning machine. These are designed to replace most contemporary open gear tuning machines such as Grover®, Schaller®, Wilkinson®, Waverly®, and others using a 26 mm center to center mounting hole pattern. They feature a precision diecast base, bronze ring gear, stainless worm gear with close tolerance bushings, and 18:1 gear ratio. For slotted headstocks with horizonal mount. [SKU:KP-3H] Specifications Base Plate material= Zinc Diecast Worm Gear material= Stainless Steel Ring Gear material= Bronze Gear ratio= 18:1 String Post Orientation= Horizontal for slotted Pegheads String Post Overall length= 1 3/32 in. (27.75mm) String Post Diameter= 1/4 in. (6.35mm) String thru hole location= 1/2 in from baseplate Mounting hole spacing= 26mm Configuration= 3 + 3 Mounting hardware included= screws only